Cisco Demonstrates 26.4Tbps on MAREA Transatlantic Subsea Cable

Cisco Demonstrates 26.4Tbps on MAREA Transatlantic Subsea Cable

Cisco (NASDAQ: CSCO) announced the successful testing of its NCS 1004 platform over MAREA, the 6,600 km subsea cable system connecting the United States to southern Europe (Virginia Beach, Virginia to Bilbao, Spain). The test was to demonstrate the ability to provide increased transatlantic bandwidth as well as simulate transpacific distances via loopback on one end of the cable.

Leveraging the flexibility of the NCS 1004, several channel capacity combinations were tested to maximize the performance and spectral efficiency on the cable. For the Virginia to Bilbao trial, 400G error-free performance was demonstrated; channels with record spectral efficiency of 6.445 b/s/Hz were achieved, while 4.52b/s/Hz spectral efficiency was tested on the looped back scenario of over 13,200km.

Network operators do not have unlimited bandwidth so spectral efficiency is the most important measurement in subsea deployments. Spectral efficiency refers to the rate that can be transmitted over a given bandwidth and is a measure of how efficiently a limited frequency spectrum is utilized by the physical layer. Spectral efficiency of a communication link can be enhanced by packing more information, bits, in a single transmission.

Thus, maximum capacity of 26.4Tbps can be achieved on MAREA cable deploying the NCS 1004 with margin. In the same way, the transatlantic loopback scenario reached up to 18.9Tbps.

“We demonstrated that 24.7Tbps could be used on MAREA with plenty of margin. We also tested in full loopback mode (Bilbao to Virginia and back to Bilbao) showing that 18.5Tbps could be deployed for double the distance, also with plenty of system margin,” said Bill Gartner, Senior Vice President and General Manager, Optical Systems and Optics, Cisco.

Cisco NCS 1004 has been designed to maximize wavelength and fiber capacity with a minimum space and power footprint. At 2RU, the system supports up to 4.8Tbps of client and 4.8Tbps of trunk traffic. Cisco NCS1004 delivers multi-haul coherent DWDM transport capabilities with agility, programmability, and simplicity of use. The Cisco NCS 2000 working with the NCS 1004 delivers agility, programmability, and massive scale for ultra-long-haul, subsea, metro, and enterprise optical networks.

Supporting resources:

For more information about Cisco Optical Networking visit www.cisco.com/go/optical.

For more information about Cisco service provider news and activities, visit the SP360 blog or follow us on Twitter @CiscoSP360.

Follow us on our LinkedIn page for targeted updates and announcements.

Subscribe to Cisco's SP360 feed.

Source of information

Cisco & ProfiBusiness.world

Date

October 7, 2019

Social networks ProfiBusiness.world

Translator

Our tip

Page generated in 1.5045 seconds.
Redakční systém teal.cz naprogramoval Vítězslav Dostál